When it comes to roof replacement, many factors need to be considered. For example, you may not know what roofing materials are included in the roof replacement cost or which roofing company is best for your roof replacement project. This article will help you get all of the necessary information so that you can make the right decision when hiring a roofer for roof replacement services in Bronx, NY!
Roof Decking
The wooden boards that make up the roof’s framing are decking. These boards will hold your shingles and other components. When you receive a new roof, you might need to replace the decking. On the other hand, your roofing contractor won’t know if your old roof has to be replaced until they’ve removed it.
If your roofing contractor discovers rotten boards, they will have to replace them before installing your roofing components. Your new architectural asphalt shingles will be able to sustain your new decking if your contractor judges that the integrity of your decking is sound.
Roof Flashing
Roof flashing is metal that goes where your shingles meet another object, such as a wall, chimney, or open valleys. It’s possible that you won’t need to replace your flashing when you get a new asphalt roof.
You won’t need to repair your flashing if it isn’t rusted and the metal roofs integrity is still intact. If your roof flashing is damaged, rusted, or you’re switching from a 3-tab to a dimensional asphalt shingle roof, you’ll need to repair it.
Underlayment
A protective layer of felt (15 lb, 30 lb, or synthetic) is spread over your decking as underlayment. As a result, it’s a crucial component of your roof. As a result, new underlayment must be installed as part of your residential or commercial roof replacement.
Keep in mind that the underlayment in your roof system is the last line of defense for the decking. As a result, investing in the best roofing material available is vital.
To learn more about why you should invest in a manufacturer’s components, read this article on how a cheap roof system costs more in the long run.
Drip Edge
A drip edge is a metal roof flashing installed at the roof’s edges to help direct water away from your fascia and other roofing components. You’ll need to replace the drip edge when you get a new asphalt roof. It is actually illegal to have it on your roof. Furthermore, if it isn’t installed according to code, it could cause you to fail a home inspection.
If you hire a contractor that takes shortcuts and doesn’t install your drip edge, you’ll have to fix it before you can even put your house on the market. To stop this from occurring to you, read this article to learn why hiring a local roofing contractor is so important.
Ice And Water Shield
Your roof valleys are essential for ensuring that water flows down your roof in the proper direction. As a result, they need to be protected from the constant flow of water that occurs during rainstorms.
Ice and water shield is a waterproof coating protecting your roof from ice and water damage.
When you get a new roof, you’ll need to place new ice and water around your roof penetrations and in your roof valleys. As part of your roof care, it’s also vital to keep your valleys clear of debris.
If you don’t, water will soak through the barrier or wash over your architectural shingles, causing leaks in the decking. Learn why it’s critical to maintain your valleys free in this essay on the need for frequent roof maintenance.
Asphalt Shingles
Your present shingles are the visible top layer of your existing roof to the outside world. As a result, when people think of replacing their roofs, they normally think of their shingles. Naturally, this indicates that your roof replacement will involve shingles. Keep in mind that you must utilize suitable roofing practices when placing your shingles.
Learn more about how good roofing methods affect your roof by reading this article on the necessity of proper roof installation.
Ridge Capping
Ridge capping is the finishing touch at the roof’s peak, where the two slopes meet. They’re thicker than standard shingles and are pre-bent to suit the ridges of your roof. The ridge capping must be repaired during a roof replacement. Be aware that some roofing contractors will use 3-tab asphalt shingles as ridge capping to save money.
They’re not designed for this, and it could lead to one of the most common roof leaks. Double-check your roofing quote with your contractor to ensure you’re getting proper ridge capping.
Roof Vents
If you don’t have enough attic ventilation, the trapped heat and cold air will severely diminish the life of your present roof. Your roof vents keep this from happening by allowing your attic to breathe correctly. This means that your roof vents will be changed simultaneously as your roof. Whether you want to keep using the same vents or switch to a different variety, it’s entirely up to you.
Learn more about your vent options and how optimal attic ventilation helps your roof by reading our article on the importance of proper attic ventilation.
Thoughts
The bulk of your roof system’s components and accessories will be replaced when you get an asphalt roof replacement. So if your decking and flashing are in good condition, you can leave them alone.
Knowing what to expect on the big day will be easier if you understand the protocol. Fortunately, we’ve already thought of this and produced another post to let you know about the most important day in your roof’s life. To begin, contact a reputable roofing contractor, like us TCI Bronx, for your residential roof replacement. Then get in touch with us right away for free roofing costs and roof estimate!
